Tools
Register Login

Black Magic Missile Works

You are here: Home » Products » UFC-3 Flight Computer » UFC-3-FMS Flight Management System Module
Saturday, February 24, 2018

UFC-3-FMS Flight Management System Module Featured

The Flight Management System Module provides unique control functions for flight stability and hybrid or monopropellant liquid motor control. Based on the Open System Developer Module it contains the same Cypress Programmable System on Chip (PSoC) that allow the user to program at a low level the module functions or use the built-in software for control functions. It includes a control algorithm for aerodynamic flight control surfaces with four stepper motor using an Inertial Measurement Unit (IMU) for attitude reference. It also includes an algorithm to control the flow of Nitrous Oxide or Nitrous Oxide Fuel Blend (NOSBX) into the motor with a stepper motor control valve based on combustion chamber (thrust) or a user developed optimization program.

Additional Info

  • Name: UFC-3 FMS Flight Management System Module
  • Code: UFC-3-FMS
  • Price: $700
  • Description:
    The UFC-3-FMS supports Vertical Trajectory Stabilization (VTS) through the control of four stepper motors driven by an Inertial Measurement Unit (IMU) and oxidizer flow control into a hybrid or NOBFX motor with a fifth stepper motor on a Flow Control Valve.  It may be programmed by the user (all tools included) or configured with the built-in management software
  • Features:
    • Cypress PSoC Programmable System on Chip 64MHz. ARM Cortex CPU
    • Memory (256KB Flash, 64KB SRAM, 2KB EEPROM, 128MB NAND Flash (Flight Log Memory)
    • Built-in Peripherals: SPI, UART, Timers, Quadrature Decoders
    • Analog Channels: 3 Differential inputs with 256x Programmable Gain Amplifiers into a 16-bit ADC supporting bridge type pressure sensors for Combustion Chamber and NOS pressure and a thrust Load Cell for Static test support
    • Stepper Motor Controllers: 5 AMIS30542
    • Altimeter: 0.15-16.2 psia (23-bit ADC), 100,000" maximum
    • Accelerometer: 3-Axis, 24g,
    • Gyroscope: STMicro 3DG20 standard
  • Options:
    • Analog Devices ADIS16365 IMU: $700
    • Analog Devices ADIS16488 IMU: $2,100
  • Accessories:
Login to post comments

Featured UFC-3 Product

  • Administrator UFC-3C CPU Base Module
    Written by Administrator
    UFC-3C CPU Base Module The all new UFC-3C Base Module forms the foundation for a broad spectrum of flight computer system implementations. This new version has 3 times the processor performance, twice the power handling capability (200 Watts) and Switch-Mode Constant Current Pyro Drivers that reduce peak battery current by 80%. Used alone it provides all the basic functionality required for flight, data logging…
    Be the first to comment! Read 10549 times Read more...

Product Spotlight

Support for University Rocketry & Engineering Projects

Ever since the first Black Magic Missile Works Universal Flight Controller (UFC-2) in 2007 we have developed systems designed to support all levels of higher education in rocketry and...

Read more

Popular Reading

UFC-3 Flight Computer

The UFC Flight Computer Family provides the most advanced flight computers in its class, supporting flights to 100,000' and beyond. Its long range two-way telemetry, GPS, 3-Axis Inertial Sensor and...

Read more